XNBZ01 VVDI BE Key Pro Plus Akıllı Anahtar Kabuğu 3 Düğme VVDI MB Aracı için 1 Ücretsiz Jeton

• More compatibility
• New design
• High Stability
• High reliability
• Digital Signature

1. Fix the bug that W164/W639 EIS data doesn’t synchronize the key.
   Fix the bug/faultthat the BE key stop work after repeatedly turn ON the ignition without remove key out from EIS/EZS for example with work on diagnostic…
2. switch IGN OFF—ON for erase faults…then car not start
3. Fix the bug/faultof trunk remote open on cars where power lifts on trunk door mainly…
4. Fix the bug that the BE key only sent RF signal for one time, after update, the RF signal can be sent for two times when press and release the key.
5. Modify the rolling algorithm, fix some errors of BE key.
6. Add pre-roll algorithm: the HASH value can roll ahead.
7. Adopt car-grade quartz crystal, improve infrared communication stability.
8. Boost the infrared signal when you press the button.
9. Support resetting the key frequency between 315MHZ and 433.92 in the way of VVDI MB tool or the PCB SMD resistor

Tip: VVDI MB tool has priority over the SMD resistor, which means if you reset the key frequency with VVDI MB tool at first, the SMD resistor won’t work,

1. Put the VVDI BE key Pro improved version PCB into the case.
2. Cover the bottom case.
3. Insert the battery and cover the case.
4. Push the metal strips on both sides into the right position.

1. Here rearmetal button.
2. Put into the small key and start button.