Product Overview: Permanent Solution for Steering Lock Failure

This emulator provides a permanent solution for "Steering Lock Failure" or "Steering Column Fault" issues commonly found in Jeep Renegade, Cherokee KL, Fiat Egea, and Fiat 500 vehicles. These faults can prevent the vehicle from starting or cause the ignition system to become unresponsive.

The emulator (simulator) permanently eliminates the problem by emulating the original mechanical Steering Column Lock (SCL) unit, which is known to fail over time.

Economical 10-Piece Pack for Professional Workshops

This product is supplied as a cost-effective 10-piece professional package. It is ideal for automotive repair shops, automotive electronics specialists, and locksmiths who regularly encounter SCL failures in Jeep Renegade, Cherokee KL, Fiat Egea, and Fiat 500 vehicles.

With this bulk package, you can provide your customers with fast, ready-to-install solutions directly from stock, saving both time and repair costs.

Main Advantage: No Programming or Adaptation Required

Since the EEPROM data from the original SCL unit is cloned to this emulator, the vehicle recognizes it as its original steering lock module.

As a result, there is no need for expensive and complicated key programming, immobilizer coding, or online adaptation procedures.

Step-by-Step Installation Instructions

1. Remove the faulty original SCL (Steering Column Lock) unit from the vehicle.

2. Carefully open the SCL housing and remove the internal electronic circuit board.

3. Desolder the original 8-pin EEPROM chip from the circuit board using a soldering iron or hot-air station.

4. Solder the original EEPROM chip into the EEPROM socket area on this emulator board, ensuring correct orientation.

5. Connect the emulator to the vehicle's original SCL connector.

6. Start the vehicle.

LED Status Indicators

Flashing RED

Error: EEPROM is not installed or cannot be read due to incorrect soldering or connection.

Flashing GREEN

Error: EEPROM is installed but contains no valid data.

Single GREEN Flash

Success: Original EEPROM data has been successfully read and the emulator is operating correctly. The vehicle is ready to start.

Package Contents

• 10 × Jeep / Fiat SCL Emulator (M4-9999)