Volvo S90, V90, XC90, XC60, V60, XC40 New Generation Steering Lock Emulator (2020-2022+)

Product Overview: Permanent Solution for New Generation Volvo Steering Lock Failure

This emulator is designed as a permanent solution for the common Electronic Steering Lock (ELV/ESL) failure found in new generation Volvo vehicles built on SPA and CMA platforms (2020–2022+), including:

• Volvo S90
• Volvo V90
• Volvo XC90
• Volvo XC60
• Volvo V60
• Volvo XC40

This failure typically causes:

• No crank / engine not starting
• Ignition not responding

The official dealer solution requires replacing the steering lock unit, which is expensive and requires complex online programming.

This emulator is engineered to permanently bypass the faulty mechanical steering lock system.

No Programming Required

Unlike some systems (e.g., Mercedes W204 emulators), this unit:

• Does NOT require coding or programming
• Works as Plug & Play
• Instantly sends a “steering unlocked” signal once connected

Step-by-Step Installation Guide

1. Turn OFF the ignition
2. Disconnect the faulty original ESCL unit connector
3. IMPORTANT: If the steering lock is stuck in locked position, remove it mechanically first
4. Connect the emulator to the vehicle’s original socket
5. Connect a professional diagnostic tool
6. Access the CEM module (or relevant system)
7. Clear/reset all steering lock related fault codes
8. Start the vehicle

LED Indicator Status

The emulator simulates the original steering lock behavior:

GREEN LIGHT (Solid):
 Successful – Steering is unlocked, vehicle ready to start

RED LIGHT (Solid):
 Steering locked (normal when ignition is OFF)

RED LIGHT (Flashing):
 Error – Fault codes in CEM not cleared
 Connect diagnostic tool and reset fault codes

Compatible Models

• Volvo S90
• Volvo V90
• Volvo XC90 (2020 – 2022+)B5
• Volvo S60
• Volvo V60
• Volvo XC60